REAM 4189 - C
1.5 FULL THD.
. 16 J 0.062 DRILL
AS SHOWN
SECTION " D.D "
DETAIL A
U. (.368) DRILL *. 81 DEEP 7 / 16-14 UNC - 2B3 BOTTOM TAP *.7 DEEP, (4) HOLES
R.005 OR
BREAK CORNERS
THIS DRAWING AND THE INFORMATION CONTAINED THEREIN IS THE PROPERTY OF Elwood Inc., AND SHALL NOT BE USED, COPIED, OR REPRODUCED WITHOUT THE WRITTEN PERMISSION OF Elwood Inc.
.656 DRILL 2.38 DP
8 SAE " O " -RING PORT 3/4 " -16 UNC - 23 THR'D. 1.5 DEEP PER SECTION " D - Ö
SECTION " B - B²
125 DRILL 2.38 DEEP; 246 DRILL X
.68 DEEP; " 16 " NPTE
1/8 " (125) DRILL 2.25 DEEP 5/32 (156) DRILL 1.75 DEEP WITH DETAIL A
3/16 (187) DRILL *.31 DEEP
.246 DRILL 2.62 DEEP (FROM SURFACE)
CAVITY - PER DETAIL B
03 R.
SECTION " A - A "
2-0322-011 O - RING
SECTION C.C²
.125 DRILL * 2.38 DEEP.515 DRILL *.69 DEEP 6 S.A.E. O - RING PORT (9 / 16-18 NF REF.)
· 5 / 32 " (156) DRILL × 2.0 DEEP
• 246 DRILL * 1.75. DEEP (FROM SURFACE)
· 5 / 32 " (156) DRILL × 1.75
DEEP; WITH DETAIL A
17/32 (531) DRILL THRU (4) HOLES
- 18 " (.125) DRILL THRU WITH DETAIL " A "
PART NAME
BAR; 32x38x4¹ / 4
SEE ECO
A ISSUE
.19 X 15 CHAMFER
DESCRIPTION OF CHANGE
G. (.261) DRILL *.93 DEEP 5 / 16-18 UNC - 2B TAP
· 56 DEEP; (4) HOLES
PART NUMBER
BILL OF MATERIAL
NOTES:
1) BREAK ALL SHARP EDGES.
2) REMOVE ALL BURRS.
3) MATERIAL MUST BE FREE OF ALL SEAMS OR FLAWS.
.246 DRILL * 1.31 DEEP 1 / 16-27 NPTE
NUMBER
MATERIAL
CODE NUMBER 11020 STL.
2.88 MIN.
IMPLIED TOLERANCES Finished Dimensions
DECIMAL INCH
SCALE
ALL DIA'S. CONCENTRIC
PLANE ANGLES ONE DEGREE
PATTERN NO
DETAIL B
MACHINE FINISH
NLESS OTHERWISE APPROVED STATED
PART NAME
ELWOOD HYDRAULICS
DRAWN AES REF. NO
DATE 7-20-95
CHECKED ORD. NO.
DATE 8-1-95
PRODUCT
REMARKS OR REFERENCE NO
WITHIN.001
TOP CAP: PILOT PROJECTION DWG SIZE
PART NUMBER
WT. EACH LBS. (Kg)
Elwood Hydraulics Company Inc.
Oak Creek (Milwaukee), Wisconsin 53154
ASSEMBLY
FILE NO.
FULL 48365 0219
SUFFIX